Multiband saturation for bass without losing the low end
A bass can fill the sub range and still disappear on a small speaker. Distortion adds harmonics above the fundamental, which can make the part easier to follow. The trouble starts when driving the entire signal changes the low end more than you wanted.
Multiband saturation lets you choose which frequencies feed each distortion stage. In SearGoldenVoxGoldenFXThe Golden BundleReference, you can use up to 5 bands with independent Flavor and Drive settings. Start with 2. You don't need to split every part of the spectrum to make this useful.
Hear the bass braam first.
Watch Sear process a bass braam. Use that recording to hear the range of the effect, then try the workflow below on your own source. These are starting decisions, not a preset copied from the video.
Find the split by listening.
Put Sear after the bass instrument or recording. Double-click the band strip to add a split, then solo each band while moving the boundary. Find a division that separates the body you want to preserve from the texture you want to push. A low sustained note and a noisy braam won't need the same crossover frequency.
Keep the low band's Drive modest, or bypass its distortion while you work on the upper band. That bypass turns off the band's distortion; it doesn't remove the band or promise an untouched signal path through the whole plugin.
Add texture above the weight.
Try Warm or Tape on the upper band first. Bring Drive up until the part reads at a low listening level. If it needs a rougher edge, try Grit or Fuzz on that band and back the Drive down before comparing. Each flavor responds differently to the source level.
Solo helps you find the change, but make the final choice with all bands playing. Distortion changes the spectrum, so splitting the input doesn't guarantee that every new harmonic stays inside that band's original frequency range.
Check the kick and the output level.
Bring the percussion back in. If the bass now fights the kick, reduce the low band's drive or change the source balance before adding more processing. Use global Mix for a parallel blend and Output to compare bypassed and processed playback at a similar perceived level. Sear doesn't make that listening decision for you.
Check a small speaker and your normal monitors. A useful result should keep the bass line understandable without making the main system feel crowded. Try the same part in Sear's free 14-day trial, or read how saturation and distortion overlap before choosing a flavor.