Split-band vs. broadband de-essing
A de-esser reduces a vocal when its detector responds to sibilant energy. Split-band processing reduces the high-frequency part of the signal. Broadband processing turns down the full signal during that reduction. Neither choice is always better.
Start with the phrase that bothers you.
Find a few words where an S or T jumps out. Listen in the mix before changing the detector frequency or reduction. A sharp consonant that sounds large in solo may help the lyric stay clear once the instruments are playing.
Try Split when you want to preserve the body.
Split-band reduction focuses the change on the high-frequency portion. In GoldenVox, start with a small amount and adjust the frequency while listening to those words. If the consonants become dull, back off. The aim is to make the phrase easier to hear, not remove every trace of an S.
Try Broadband when the whole consonant feels too forward.
Broadband reduction lowers the complete signal when the detector responds. It can suit a phrase where a brief level dip sounds more natural than changing only the top. Listen for the vocal moving back in the mix. Too much reduction can make the word lose its place.
Use Delta to hear the reduction.
GoldenVox’s Delta audition plays the signal the de-esser removes before the Air stage. Use it to check whether the detector is catching the intended part of the phrase. Then turn Delta off and judge the normal vocal. Delta overrides global Mix while engaged; global bypass still takes priority.
Check again after Air.
GoldenVox runs Tone EQ before the De-esser and Air after it. Changes to the tone can alter the detector’s input. Air can change the final brightness after reduction. Listen to quiet words as well as loud phrases because Air varies its lift with the signal level.
Explore GoldenVox’s de-esser or see how the full vocal chain fits together.